| Purolator is a leading manufacturer of HVAC filtration products for residential, commercial/industrial, and HEPA applications. |
|
|
| Home » Specialty Filters |
|
This rigid box filter is a high efficiency, extended surface ASHRAE rated air filter. It is built specifically for environments with elevated operating temperatures up to 750F. Recommended airflow rate: 500 FPM (625 FPM maximum).
-
Rigid Cell Filters (Box Filters), Specialty Filters
- MERV Rating: 11
|
|
This rigid box filter is engineered to provide medium and high efficiency filtration combined with a prolonged life cycle. Designed for use in high-velocity or turbulent airflow conditions, allowing for airflow up to 2500 CFM.
-
Rigid Cell Filters (Box Filters), Specialty Filters
- MERV Rating: 11
|
|
|
This self-contained v-configuration rigid cell filter is maintenance free, easy to replace and can withstand nominal airflow of 3000 CFM. The SERVA-Cell VA is also available in a Gas Turbine (GT) model.
-
Rigid Cell Filters (Box Filters), Specialty Filters
- MERV Rating: 11
|
|
SERVA-CELL 2VS filters offer an excellent option for applications currently using rigid cell style extended surface filters. They are a good replacement for corrugated separator style or supported pleat style rigids. Serva Cell 2VS filters are made of all plastic construction, are made of 100% synthetic media. Serva-Cell 2VS filters are fully incinerable and moisture and chemical resistant. Serva Cell 2 VS filters are low in resistance, light weight and rated U.L. Class 1
-
Rigid Cell Filters (Box Filters), Specialty Filters
- MERV Rating: 11
|
|
This filter is a medium efficiency, self-supported, extended surface pleated air filter, effective in stand-alone applications or as a prefilter in place of a disposable, permanent, or media pad/frame filter.
-
Specialty Filters
- MERV Rating: 8
|
|
The hi-E 40I is a medium efficiency pleated filter specially constructed for use in systems requiring UL Class I listed products. The perimeter frame is constructed of UL approved non-flammable board. The pleated media is bonded upstream and downstream to diagonal support elements to increase filter stability. The media is a special 1/8" thick, high density, ultra-fine fiberglass reinforced by a woven fiberglass mesh. The hi-E 40I offers 30-35% average efficiency and 90-93% average arrestance when tested in accordance with ASHRAE 52.1-1992.
-
Specialty Filters
- MERV Rating: 8
|
|
The hi-E 40H is a medium efficiency pleated filter specially constructed for use in systems involving elevated operating temperatures. The perimeter frame on the hi-E 40H is constructed of 24 gauge aluminized steel. The pleated element is supported downstream by a 24 gauge expanded aluminized steel face guard to ensure stability of the media pak at elevated temperatures. The filter media is 1/4" thick, high-density ultra-fine fiberglass reinforced by a woven fiberglass mesh. The hi-E 40H is constructed to operate at 400F continuously and may be subjected to temperatures up to 450F for short durations of not more than 10 minutes.
-
Specialty Filters
- MERV Rating: 8
|
|
-
Specialty Filters
- MERV Rating: 8
|
|
|
| |
