Airguard
DP Max

DP Extended Surface Panel Pleated Filters (Standard Capacity)

Using ground-breaking R&D to provide a lower pressure drop and higher dust holding, the DP filters are better than ever. And with the largest inventory of pleats in the industry, availability is never an issue.

Media

• Moisture resistant beverage board frame
• Two-piece frame provides rigidity with double-wall thickness around outer edge
• Die-cut pattern maximizes contact points between media pack and frame providing strength and rigidity
• 4” models use die-cut finger separators to stabilize each pleat
• Water repellent, high-strength adhesive used to bond frame with media pack
• Corrosive-resistant, expanded metal support grid made of galvanized steel
• Pleat tips of media pack bonded to diagonal support members

Pleat Consistency:

DP Merv 10/8A uses sophisticated production control techniques to ensure consistent pleat count, height, shape, and spacing. This uniform spacing contributes to a better-performing pleat with low pressure drop, full depth dust loading, and longer service life.

Durability:

The Pleats hold together even when wet due to moisture resistant media and construction, preventing delaminating, excessive buckling, collapsing, racking, warping, and bending. Additionally, the galvanized steel metal grid resists rust, maintains pleat shape, and prevents fluttering in even the most rugged conditions.